Price include: One bearing One platter (with strobe markings) Two DC motor driver One belt Two power supply (110v-240v) Two 10mm crystal plinth One arm base (custom-made cutout for your tonearm) Four magnetic levitation device Price does not include tonearm. shipping weight: about 12kg
Category: 90 -Archive DIY Projects
BIX Classic Turntable (magnetic levitated)
Price include: One bearing One platter (with strobe markings) One DC motor driver One belt One power supply (110v-240v) One wood plinth One arm base (custom-made cutout for your tonearm) Four magnetic levitation devices Price does not include tonearm. Shipping weight : about 8 kg.
BIX Classic Turntable
Price include: One bearing One platter (with strobe markings) One DC motor driver One belt One power supply (110v-240v) One wood plinth One arm base (custom-made cutout for your tonearm) Three solid aluminum feet Price does not include tonearm. Shipping weight : about 8 kg.
Cleo 24bit/192khz USB DAC
Cleo USB DAC Full review: In English : http://www.tnt-audio.com/sorgenti/cleo_usb_e.html, In Itallian : http://www.tnt-audio.com/sorgenti/cleo_usb.html Cleo is not in available for sale at this moment.
The Vinyl Song Universal Tube Output Stage EZ Phono Installation
Vinyl Song Universal Tube Output Stage EZ Phono Installation Manual The diyhifisupply® Universal Tube Output Stage has been designed to offer a State of the Art tube amplification stage, intended to be applied to CD-Players, DVD-Players and DA-Convertors to completely replace the original solid state analogue circuit and phono stages. There are manyRead More
Introduction and Overview
1 – Introduction and Overview The Vinyl Song is a State of the Art Phono Preamplifier/Equalizer with 38dB (MM) and 62dB/68dB (MC selectable) of gain. By using the Silk 600 Ohm LCR RIAA EQ Modules not only a very precise equalization is attained, but also noise is kept very low. The (optional for theRead More
UTS module Specifications
2 – UTS module Specifications: 2.1 Mechanical: Tube PCB with 10mm Standoffs (10mm standoffs are required and 10mm clearance must be present below the PCB): 140mm deep; 80mm wide; 45mm high Fixing holes in the four corners on a 71mm X 131mm rectangle. Fixing holes require M3 or equivalent screws. Mains transformer: 76mmRead More
UTS Settings and wiring
3 – UTS Settings and wiring This application will produce a moving magnet and high output moving coil cartridge compatible Phono stage. It use two Universal Tube Output Stages together with a LCR 600 ohm module to form the RIAA Equalisation network as Phonostage. One UTS Module will be used for each channel, so TubesRead More
Wiring the chassis and Modules
4 – Wiring the chassis and Modules Please check your Kit content against the list to the right. Take care to first review the steps outlined below, assemble the necessary tools, parts etc. Many of the required connections can be made without using a soldering iron. However the connections for the RCA Jacks and fromRead More
Testing and first power-up
5 – Testing and first power-up The modules making up your Vinyl Song Kit are individually tested before shipping. So no extensive testing is required. However, we recommend a set of basic checks before first switch-on. 5.1 Basic testing and checks Please re-check all the wiring and connections against the drawings and Photos. Check thatRead More