Classification- Dome-type bulb of glass, filametary of carbennation Th-w a Copper ceramic base with four-prong bayonet golden pins, carbon plate triode.
Application -Audio power amplifier Class A1 or Class AB1.
Dimensions -Dimensions, outline diagrams of the tube and bases, and the arrangement of electrode connections to the base terminals are shown in Figures 1 and 2.

Fig. 1

Fig. 2
Nominal operating conditions and parameters
Filament voltage* : 10V
Nominal filament current : 3.2A
Plate voltage : 1250V
Grid voltage** : -200V
Plate current : 80mA
Plate resistance : 1.7kohms
Amplification factor : 5.0
Load resistance : 3.4 kohms
Signal voltage(pk) : 69.0V
Output power : 15W
Grid to plate transconductance : 3.0mA / V
*Alternating-current filament supply or Direct-current filament supply.
**Alternating-current filament supply is used. The grid and plate returns should be connected to a center tap on the secondary of the filament transformer. Direct-current filament supply is used. The grid and platter returns are connected to the negative end of the filament.
Suggest Operating conditions and parameters Class A1 power amplifier of single tube
Plate voltage
|
1000
|
1000
|
1250
|
V
|
Grid voltage
|
-145
|
-155
|
-209
|
V
|
Load resistance
|
6
|
9
|
16
|
kohms
|
Plate current
|
90
|
65
|
52
|
mA
|
Signal voltage(pk)
|
110
|
145
|
V
|
|
Plate resistance
|
1.7
|
1.9
|
2.1
|
kohms
|
Output power
|
24
|
21
|
24
|
W
|
Lass AB1 power amplifier of push-pull
Plate voltage
|
800
|
1000
|
1000
|
1250
|
V
|
Grid voltage
|
-125
|
-170
|
-175
|
-225
|
V
|
Load resistance
|
45
|
46
|
46
|
66
|
kohms
|
Plate current
|
80
|
70
|
40
|
40
|
mA
|
Signal voltage(pk)
|
177
|
240
|
V
|
||
Plate current (max. sig,)
|
177
|
240
|
V
|
||
Output power
|
40
|
75
|
75
|
75
|
W
|
Characteristics-Average characteristics

Fig. 3
Limiting Operation Conditions for Safe Nor simultaneous ratings
Maximum plate voltage : 1250 volts
Maximum plate dissipation : 75 watts
Maximum plate current : 120mA
Maximum input powe of signal : 150 watts