120mm x 210mm x 330mm (h x l x w)
Power for your projects! The chassis often just doesn’t have enough room.
For linestages, phono stages and amplifiers where you want to put the psu in a separate enclosure.
The case is aluminum so easy to work and will not vibrate with the transformer.
The power transformer supplied by customer or you can choose from our transformer page
Standard umbilical cable is 1M length. Bayonet socket is 8-pin or 7-pin, depends on stock availability. Power switch is on the IEC receptacle. The tube socket mounting plate fits octal sockets and the case is vented above and below the tube. Excellent for 5Ar4 etc.
There is enough open space to install filament supply module and still have space to add several 47uf film caps to the filter network. State of the art made easy.
Or add you own choke/cap design. Load on the film caps – there is room.
- non magnetic aluminum cover and chassis,
- IEC connector with power switch,
- cable made of 8 teflon coated copper wires
- bayonet male/female set,
- 4 feet,
- ceramic tube socket and mounting plate
Want to use your own power transformer? Choose from our magnetics page.
shipping weight is 3kg. Some countries may have very inexpensive surface shipping. Enquire for the rates.